PRESENTING AUTHORS

University of Nottingham, Faculty of Engineering 

A NOVEL APPROACH TO JOHNSON-COOK MODEL VALIDATION USING FLATTENING RATIO IN COLD SPRAY - D16-68

University of Naples Federico II

SUTAINABLE SURFACE TREATMENTS OF WIRE ARC ADDITIVELY MANUFACTURED TI6AL4V COMPONENTS USING ORGANIC ACIDS - C11-53

University of Aveiro

LASER SURFACE MODIFICATION OF COPPER FOR DELAYED FORMATION OF PATINA - C10-52

IRT M2P

COMBINING SURFACE FINISHING TECHNOLOGIES FOR TREATING COMPLEX ADDITIVELY MANUFACTURED METALLIC PARTS  - C02-9

Universitat de Barcelona

COMBINING HIGH-SPEED NANOINDENTATION AND FESEM FOR NITRIDED AND CARBURIZED  SUPERDUPLEX STAINLESS STEELS CHARACTERIZATION - D15-66

Silesian University of Technology

CONCEPT OF DUAL PHASE SYSTEM IN ADVANCED THERMAL BARRIER COATINGS - B04-8

STEROS GPA INNOVATIVE S.L.

DRY-ANODIZING OF TITANIUM: EFFECT OF ACID CONTENT AND ELECTRICAL PARAMETERS ON OXIDE FILM FORMATION - E06-60

Research and testing institute Plzen

OPTIMIZATION OF TWAS SPRAYING OF CUSTOM-MADE AL-FE ALLOY WIRE - A03-18

Université de Reims Champagne-Ardenne

THE EFFECT OF A CONSTANT MAGNETIC FIELD ON COPPER-SILVER ALLOY ELECTRODEPOSITION - B07-19

Université de Lyon-INSA de Lyon

OXIDATION OF COLD SPAY NI-AL COATINGS DURING HIGH TEMPERATURE POST-TREATMENT - B02-3

Universitat de Barcelona

MACRO-TO-NANOSCALE ANALYSIS OF AMORPHOUS CARBON COATING ON CEMENTED CARBIDES - D17-74

UFSC

STRUCTURAL ANALYSIS OF CARBON THIN FILMS DEPOSITED IN TI-6AL-4V BY THE PIII&D TECHNIQUE - D09-36

DIFFUSION WELDING OF SURFACE-TREATED ALUMINUM PLATES VIA PLASMA SPUTTERING - C07-43

CIDETEC  

EXPLORING HYDROGEN BARRIER BEHAVIOUR IN ELECTROLESS NI-P COATINGS - A16-78

Oerlikon Surface Solutions AG

OXIDATION RESISTANCE AND SURFACE ROUGHNESS OF PVD MCRALY COATINGS - B06-12

Université de Franche-Comté, CNRS, Institut UTINAM

316L STAINLESS STEEL ELECTOCHEMICAL TEXTURING IN NON-CONVENTIONNAL ELECTROLYTE FOR TRIBOLOGICAL APPLICATION - B09-28

Łukasiewicz Research Network – Krakow Institute of Technology

SURFACE ENGINEERING OF TI-6AL-4V ELI ALLOY FOR TRIBOLOGICAL APPLICATIONS - C08-44

Thapar Institute of Engineering and Technology

A SUSTAINABLE APPROACH FOR THE DEVELOPMENT OF NI-BASED COMPOSITE CLADS FOR ENHANCING CAVITATION EROSION RESISTANCE - A10-55

University of Salerno

COLD SPRAY METALIZZATION OF 3D PRINTED PA12: OPTIMIZATION OF PROCESSING PARAMETERS - A04-20

Université de Franche-Comté, CNRS, Institut UTINAM

ELECTROPOLISHING OF ADDITIVELY MANUFACTURED TA6V PARTS IN ETHALINE UNDER PULSED POLARISATION - B10-34

Facultad de Química, UNAM

MODIFICATION AND ELECTROCHEMICAL ASSESSMENT OF AN ORGANIC COATING FOR PROTECTION OF SILVER CULTURAL HERITAGE - A07-30

STEROS GPA INNOVATIVE S.L.

COMPARATIVE ANALYSIS OF ALUMINA ALLOTROPIC PHASES FOR CATALYTIC APPLICATIONS: ADVANCEMENTS WITH DIRECT INK WRITING VS. LIMITATIONS OF CHEMICAL ETCHING - C13-59

CIEFMA-UPC

POST-TREATMENT EFFECTS ON THE CONTACT MECHANICAL RESPONSE OF CVD-COATED WC-CO CEMENTED CARBIDES - D18-79

Materia Nova ASBL

DEVELOPMENT OF NEW NICKEL ALLOY COATINGS BY ELECTROPLATING FOR UREA OXIDATION REACTION - B03-4

Materia Nova ASBL

SOL-GEL COATINGS FOR EXTREME OPERATING CONDITIONS IN AERONAUTIC SECTORS - E02-14

Université Polytechnique Hauts-de-France

FEMTOLASER TEXTURING OF TA6V: MONITORING SURFACE MORPHOLOGY AND MECHANICAL PROPERTIES - C05-31

Universidad Pública de Navarra

TRIBOLOGICAL BEHAVIOUR OF LASER TEXTURED AND ALCRN COATING COMBINATION - D02-11

Eurecat

COATINGS AND SURFACE TREATMENTS FOR BIOMEDICAL APPLICATION - B15-70

CPT-UB

MANUFACTURING AND PROPERTIES CHARACTERIZATION OF TI PATTERNED COATINGS FOR WATER ELECTROLYZERS BY COLD GAS SPRAY -  D19-80 

Zanini Auto Group

OPTICAL CHARACTERIZATION AND ITS CORRELATION WITH NANOCRYSTALLINE STRUCTURE IN POROUS IN-COATES PC - E05-46

STEROS GPA INNOVATIVE S.L.

ADVANCING SURFACE FINISHING FOR ENHANCED DURABILITY UNDER SERVICE-LIKE WORKING CONDITIONS - KEY-02-61

Asociación de Investigación de la Industria Cerámica (AICE)

LIFE REPLAY: A NEW LIFE FOR CERAMIC INKJET INK WASTE  - F03-41

University of Mons

INFLUENCE OF DIFFERENT PEO REGIMES AND SOL-GEL SEALING ON THE CORROSION RESISTANCE OF ALUMINIUM ALLOYS - B08-22

Université de Lorraine, CNRS, Institut Jean Lamour

CERAMIC-BASED COMPOSITE COATINGS DEVELOPED BY COLD-SPRAY AND PLASMA ELECTROLYTIC OXIDATION  - B11-39

University of Aveiro

ANAPHORETIC COATINGS WITH LDH NANOCONTAINERS AS NOVEL SURFACE TREATMENTS FOR ALUMINUM ALLOYS - F05-73

Materials Science Department, University of Mons

COMPARATION OF SPARK AND SOFT REGIMES IN THE PEO PROCESS: CORROSION AND WEAR PERFORMANCE OF AZ31 ALLOY - C01-5

Chongqing University

LAYERED DOUBLE HYDROXIDE SELF-HEALING COATINGS ON MAGNESIUM ALLOYS - KEY-01-45

Institute of metal research, CAS

A NOVEL PHOSPHATE-CERAMIC COATING FOR HIGH TEMPERATURE OXIDATION RESISTANCE OF TI65 ALLOYS - A12-67

SAFRAN Tech

PLASMA ELECTROLYTIC POLISHING AS POSTPROCESSING TREATMENT FOR ADDITIVELY MANUFACTURED NICKEL-BASED AERONAUTICAL PARTS - C12-54

IRT-M2P

COMPARATIVE STUDY OF THE CORROSION RESISTANCE OF DIFFERENT ZINC BASED COATINGS DURING ACCELETATED CORROSION RENAULT ECC-1 TEST - E01-13

Politecnico di Milano

ELECTROLYTIC PHOSPHATING FOR STEEL WIRE DRAWING AS AN ALTERNATIVE TO CONVERSION COATINGS - B12-57

ANTI-SCALE NIP-PTFE COMPOSITE COATING FOR CORROSION PROTECTION - B13-58

University of Modena and Reggio Emilia

OPTIMIZATION OF COLD SPRAY PARAMETERS FOR ALCUCRFENI+30TIC COATINGS: EXPLORING THE POTENTIAL OF HIGH-ENTROPY ALLOYS IN WEAR-RESISTANT APPLICATIONS - A13-69

Institute of Metallurgy and Materials Science, Polish Academy of Sciences

ADVANCED MICROSTRUCTURE STUDY OF MICRO-ARC OXIDATION PRODUCED COATINGS ON PLASTICALLY DEFORMED - D08-32

Fraunhofer IKTS

BEHAVIOR OF HVOF-SPRAYED WC-CR3C2-NI HARDMETAL COATINGS AT HIGH TEMPERATURES IN DIFFERENT ATMOSPHERES - D12-49

Cidetec Surface Engineering

COLLOIDAL ANAPHORETIC E-COATING APPLIED BY IMMERSION AND BRUSH PLATING FOR CORROSION AND CHEMICAL PROTECTION OF AA6082 ALLOY - A05-25

Universiti of Silesia in Katowice, Institute of Materials Engineering

ELECTROPHORETIC DEPOSITION OF NATURAL POLYMER COATINGS ON TITANIUM ALLOY FOR MEDICAL APPLICATIONS - B14-64

Fundación Centro Tecnológico de Miranda de Ebro (CTME)

CHARACTERISATION AND EVALUATION OF PLASMA-SPRAYED COATINGS ON POLYMERIC SUBSTRATES - A06-27

Indian Institute of Technology Guwahati

PROCESS PARAMETER OPTIMIZATION OF TROCHOIDAL TOOLPATH IN HYBRID-ELECTROCHEMICAL MAGNETORHEOLOGICAL (H-ECMR) FINISHING - C14-62

National Institute of Technology Meghalaya

EXPERIMENTAL INVESTIGATION ON SURFACE MODIFICATION OF AL-7075 ALLOY USING TERNARY MATERIAL (W-MWCNT-CU) GREEN COMPACT TOOL ELECTRODES - A09-50

Université de Franche-Comté

EVALUATION OF DEEP EUTECTIC SOLVENTS BASED ON CHOLINE CHLORIDE FOR THE ELECTROCHEMICAL FINISHING OF 18K GOLD ALLOYS - F01-33

Dublin City University

EFFECT OF CHEMICAL SURFACE POST-PROCESSING ON THE ROUGHNESS OF NITI FABRICATED BY LASER POWDER BED FUSION  - C06-35

CNRS

EXPERIMENTAL COMPARISION OF LIGHTNING STRIKE AND HIGH ENERGY DIRECTED BEAMS IRRADIATIONS EFFECTS IN AERONAUTIC CFRP COMPOSITES WITH SURFACE MODIFICATION PROTECTION  - E04-38

Universidad Rey Juan Carlos

EROSION RESPONSE OF Al AND TI ALLOYS MANUFACTURED BY CSAM - D06-24

University of Mons

PIONEERING SURFACE ALLOYING TECHNIQUE TO PROTECT PLATINUM/RHODIUM DIE SURFACES AGAINST HIGH-TEMPERATURE OXIDATION - C03-17

Universitat de Barcelona

ENVIRONMENTAL APPLICATIONS OF SUPERHYDROPHOBIC MATERIALS - A11-63

Universidad Nacional Autónoma de México

ANTI-CORROSION CONVERSION TREATMENT USING LANTHANUM SALTS ON MAGNESIUM VIA DEEP EUTECTIC SOLVENT (DES) FOR SELF-HEALING PROPERTIES  - C04-29

University of Silesia

MICROSTRUCTURE CHARACTERIZATION OF MAGNETRON SPUTTERED NI/AL AND TI/AL MULTILAYERS - D10-37

Universidad Rey Juan Carlos

EFFECT OF HIGH TEMPERATURE EXPOSURE ON THE FUNCTIONAL AND STRUCTURAL PERFORMANCE OF LOW-POWER-PLASMA SPRAYED INCONEL 625 COATINGS FOR THERMAL SOLAR RECEIVERS - D07-26

Northeastern University

OVERVIEW OF THE DESIGN OF PROTECTIVE COATINGS ON MAGNESIUM ALLOYS: EFFECT OF ALLOY MICROSTRUCTURE AND BATH CHEMICAL COMPOSITION ON THE COATING PERFORMANCE - KEY-03-71

Thapar Institute of Engineering & Technology

CHARACTERIZATION OF CU-BASED COMPOSITE CLADDING DEVELOPED THROUGH MICROWAVE HEATING ON A CU SUBSTRATE - D14-65

Impact Innovations GmbH

COLD SPRAY FOR INDUSTRIAL APPLICATION - E03-21

Université de Toulouse

MICROSTRUCTURE OF TRIVALENT CHROMIUM: THERMAL TRANSFORMATION AND INPACT OF SOLUTE CONCENTRATION - D13-56

Politecnico di Milano

INVESTIGATING PARTICLE INTERACTIONS AND BONDING IN COLD-SPRAYED COPPER-ALUMINA CERMET DEPOSITS - D05-23

School of Materials Science and Engineering, South China University of Technology

IN-SITU RAPID PREPARATION OF CU-MOFS FILM ON TITANIUM ALLOYS AT LOW TEMPERATURE - A14-76

University of Mons, Coventry University

DIOCTYL SULFOSUCCINATE SODIUM SALT (AOT) AS A CORROSION INHIBITOR FOR AZ31 MG ALLOY AND MODIFYING AGENT FOR LAYERED DOUBLE HYDROXIDE (LDH) - A02-7

University of Mons, Coventry University

OPTIMISATION OF THE ACTIVATION STEP OF THE ELECTROLESS COPPER AND NICKEL PROCESSES OF NON-CONDUCTIVE MATERIALS USING ZINC AND COBALT AS THE UNIVERSAL INITIATOR - B01-1

National Institute of Technology Meghalaya

SURFACE MODIFICATION OF HASTELLOY C 276 BY POWDER ADDED REVERSE MICRO-EDM SETUP - C09-51

University of Trento

THE EFFECT OF THE ADDITION OF 316L STAINLESS STEEL FLAKES ON MECHANICAL BEHAVIOUR OF ENAMEL COATINGS - D01-6

Fraunhofer IKTS

ELECTRICAL INSULATION PROPERTIES OF APS OXIDE COATINGS  - D11-42

Northeastern University

BRIDGE FOR THE THERMODYNAMICS AND KINETICS OF ELECTROCHEMICAL CORROSION: THE DESIGN OF SELF-DENSIFIED PLASMA ELECTROLYTIC OXIDATION COATING ON MG ALLOYS - C15-72

Institut Jean Lamour, Université de Lorraine

EVIDENCE OF INTERNAL PARTIAL DISCHARGES DURING THE PLASMA ELECTROLYTIC OXIDATION PROCESS FROM ALUMINIUM MATRIX COMPOSITE LAYERS OBTAINED BY COLD SPRAY - F02-40

UMONS

CORE-SHELL CO(B)@WC POWDERS SYNTHESIZED BY ELECTROLESS PLATING FOR CEMENTED CARBIDES APPLICATIONS - B05-10

THE UTILISATION OF ZINC AND COBALT AS NOVEL INITIATORS FOR ELECTROLESS COPPER PLATING OF NON-CONDUCTIVE MATERIALS - KEY-04-75

Thapar Institute of Engineering and Technology

ENHANCING PUNCH SHEAR STRENGTH OF FDM-FABRICATED PLA SPECIMENS THROUGH ULTRASONIC-ASSISTED POLYDOPAMINE - F04-47

Thapar Institute of Engineering and Technology

ULTRASONIC ASSISTED COATING OF FUSED DEPOSITION MODELING BASED PLY LACTIC ACID SCAFFOLDS FOR IMPROVED LOAD BEARING STRENGTH - A08-48

Politecnico di Milano

PREDICTING THE ADHESION STRENGTH OF COLD SPRAYED SINGLE PARTICLES BASED ON PHASE FIELD FRACTURE METHOD - D04-16

School of Materials Science and Engineering, South China University of Technology

ONE-STEP IN SITU PREPARATION OF ZR(TI)-MOFS ON TITANIUM ALLOYS AT A LOW TEMPERATURE OF 80 °C AND ATMOSPHERIC PRESSURE - A15-77

Research and Testing Institute Plzeň

METALLIZATION OF CFRP MATERIALS VIA HVOF TECHNOLOGY - A01-2